Table of Contents
Advertisement
3
Tuning
Starting the Instrument
Starting the Instrument
1 Follow the procedures in
page 61 to begin operation of the instrument.
2 Display the Instrument Status window if it is not visible in the Mass Hunter
Data Acquisition program, in one of the following ways:
•
•
3 Hover over the TQ device pane and click On.
4 Monitor baseline and adjust plot if necessary. See
adjusting plot"
43
"Starting Up and Shutting Down the Instrument"
Open the Status layout.
On the ribbon, click Instrument Status in the Windows section.
on page 66.
Agilent Triple Quadrupole LC/MS System User Guide
"Monitoring baseline and
on
Advertisement
Table of Contents
