Table of Contents
Advertisement
4
Basic Operation
Switch LC stream to Waste
b Right-click an LC module in the Instrument Status window and select one
c Monitor the baseline and adjust the plot to make sure the column is
6 Set up to view real-time parameter values (actuals).
The Actuals window can be customized to display instrument conditions for
viewing.
a Click Actuals in the ribbon to display the Actuals window.
b Right-click the Actuals window and select Setup.
c Select parameters to appear in the Actuals window.
71
of the commands to change any non-method control parameters, if
needed.
equilibrated and the baseline stable. (See
procedure.)
Agilent Triple Quadrupole LC/MS System User Guide
step 6
and
step 7
in this
Advertisement
Table of Contents
