Toro Reelmaster 5010-H Operator's Manual page 81

Maintenance
Service Interval
Every 50 hours
Every 100 hours
Every 150 hours
Every 250 hours
3464-478A
Maintenance Procedure
Drain water or other
contaminants from the fuel/water
separator.
Inspect the electrical cables.
Check the tire air pressure.
Check the coolant level.
Remove any accumulated
debris, including grass clippings,
leaves, and any other foreign
material from the machine (more
frequently in dirty operating
conditions). Pay particular
attention to the screen, oil
coolers and/or radiator.
Check the hydraulic-fluid level.
Inspect the hydraulic lines and
hoses.
Check the reel to bedknife
contact.
Inspect the seat belt(s).
Grease the bearings and
bushings (and immediately after
every washing).
Clean the battery and check the
condition of it (or weekly,
whichever comes first).
Check the battery-cable
connections.
Inspect the cooling system
hoses.
Check the condition and tension
of the alternator belt.
Change the engine oil and the
engine-oil filter.
Torque the wheel lug nuts to 94
to 122 N∙m (70 to 90 ft-lb).
Qty Description
Part No.
-
-
-
-
-
133-8086
133-8087
-
-
-
108-1190
-
-
-
104-3494
127-0511
121-6395
121-6394
-
Page 6–2 Maintenance: Recommended Maintenance Schedule
- -
- -
- -
- -
- -
PX Extended Life Hydraulic
1
Fluid (5 gallons)
PX Extended Life Hydraulic
1
Fluid (55 gallons)
- -
- -
- -
Premium all-purpose grease
1
(14 oz)
- -
- -
- -
1 Alternator belt
Engine-oil filter
1
15W-40 Premium Engine Oil (5
1
gallons)
15W-40 Premium Engine Oil
1
(55 gallons)
- -