Toro Reelmaster 5010-H Operator's Manual page 56

Overview of the InfoCenter Display (continued)
Machine Settings
Menu Item
Front Backlap
Rear Backlap
Mow Speed
Transport Speed
Blade Count
Height of cut (HOC)
Front Reel Speed
Rear Reel Speed
Eco Mode
Powerboost
Powershed
Smart Power
Acceleration
Clip Control
About
Menu Item
Model
SN
S/W Revision
InfoCenter S/W Revision
Operation: Before Operation
Description
Controls the speed of the front reels in backlap
mode.
Controls the speed of the rear reels in backlap
mode.
Controls the maximum speed while in mow (low
range). This is used for determining the reel
speed.
Controls the maximum speed while in transport
(high range).
Controls the number of blades on the reel for
reel speed.
Controls the height of cut (HOC) for determining
the reel speed.
Displays the calculated reel speed position for
the front reels. The reels can also be manually
adjusted.
Displays the calculated reel speed position for
the rear reels. The reels can also be manually
adjusted.
When activated, the Economy Mode lowers the
engine speed while mowing to reduce noise and
fuel consumption. The reel speed does not
change, but the mow speed is decreased if the
mow stop is not adjusted accordingly.
Turns Powerboost on and off.
Turns Powershed on and off.
Turns Smart Power on and off.
Low, Medium, and High settings control how
quickly the traction speed reacts when you
move the traction pedal.
Turns Clip Control on and off.
Description
Lists the model number of the machine.
Lists the serial number of the machine.
Lists the software revision of the primary
controller.
Lists the software revision of the InfoCenter.
Page 5–9 3464-478 A