Maintenance Check Item
1.
Check the glow plug and injector nozzles if the engine starts hard, produces excess smoke, or runs rough.
2.
Immediately after every washing, regardless of the interval listed
Refer to your engine operator's manual for additional maintenance procedures.
Notation for Areas of Concern
Inspection performed by:
Item
Date
1
2
3
4
5
Pre-Maintenance Procedures
Preparing for Maintenance
1. Park the machine on a level surface, engage the parking brake, and disengage the
PTO.
2. Move the lower mow/raise control to the M
3. Shut off the engine, remove the key, wait for all moving parts to stop, and allow the
engine to cool.
Maintenance: Pre-Maintenance Procedures
For the week of:
Mon.
Tues.
IMPORTANT
Information
position.
OW
Page 6–5
Wed.
Thurs.
Fri.
Sat.
Sun.
3464-478 A