Cutting-Unit-Power Disconnect; Specifications - Toro Reelmaster 5010-H Operator's Manual

Cutting-Unit-Power Disconnect

Before installing, removing, or working on the cutting units, disconnect the cutting units from
the power supply by separating the cutting-unit-power-disconnect connector
under the seat. Plug the connector back in before operating the machine.
If you do not disconnect the power to the cutting units, someone could accidentally
start the cutting unit, causing serious injury to hands and feet.
Always separate the cutting-unit-power-disconnect connector before working on the
cutting units.

Specifications

Note:
Specifications and design are subject to change without notice.
Transport width
Width of cut
Length
Height w/ ROPS
Weight*
Product Overview: Specifications
G454877
CAUTION
228 cm (90 inches)
254 cm (100 inches)
282 cm (111 inches)
160 cm (63 inches)
1360 kg (2,999 lb)
Page 4–9
, located
3464-478 A