Fskoperation; Packet(Afsk) Operation - Kenwood TS-850S Instruction Manual

4-8. PACKET(AFSK) OPERATION
METER key
:
Used
to select the di
ATT switch —
meter function in transn
This switch allows
attenuation of the input J
i
FIL
AIP switch
signal by 6, 12 or 18 dB.
adoungd iS
ae
When switched on, __it
reduces interference from
strong signals.
selectivity.
THRU/AUTO switch
THRU: Antenna tuner is off.
AUTO: Antenna tuner is on.
AGC switch
Normally set to FAST.
PWR control
Power
can be controlled
in
FINE key
all modes.
Makes one turn of t
knob equal 1 kH
step) to facilitate tur
(RECEIVING)
[1] Connect the communication terminal signal line to the ACC2 connector on the rear.
[2] Turn on the DC power supply and then turn the transceiver's power switch ON.
[3] A frequency is shown in the display.
Press the UP/DOWN switches to select the desired frequency band.
When the 1 MHz step position is selected, the MHz indicator will light.
[5] Select LSB or USB with the MODE key.
[6] Turn the AF gain control clockwise until a signal or noise is heard.
Rotate the TUNING knob and select an open channel.
28