Memory Reset; Ric Mam Cse; Rewriting Call Channel Data - Kenwood TM-732A Instruction Manual

5) RESEF
5-1. Memory Reset
All user programmed data will be reset to factory
defaults.
1. Turn the Power switch off.
2. Press and hold the MR key and turn on the POWER
switch. Hold the key down until all the LCD
indicators light.
3. Release the MR key.
5-2. VFO Reset
The microprocessor's VFO memory (excludes memory
channels, CALL channel, and paging memory channel)
will be reset to factory defaults.
1. Turn the Power switch off.
2. Press and hold the VFO key and turn on the
POWER switch. Hold the key doen until the normal
display appeas(Aproximately 1 second).
3. Release the VFO key.
() VFO reset of one band only
Reset all data except the call channel, memory
channel, paging code, and functions (Such as LOCK,
BEEP) common to the other bands.
1. Turn the POWER switch off.
2. Hold down the VFO key and the BAND SEL key for
the band to be reset, then turn on the POWER
switch.Hold the key doen until the normal display
appeas(Aproximately 1 second).
3. Release the VFO key and BAND SEL keys.
38
6. Rewriting Call Channel Data
1. Press the BAND SEL key for the desired band.
2. Select the desired Call channel frequency, tone data,
etc.
3. Press the F key momentarily. The F indicator will
light and the memory channel indicator will light.
4. Press the CALL key within 10 seconds of pressing
the F key to enter the data into memory. A long
beep will sound and the F indicator and memory
channel indicators will turn off to confirm data entry.
Split data can be stored in call chanel
5 Tostore split data in call channel, press the CALL
key for at laest a second in step 4.
The —and-+ indicators light.
6. Select the transmit frequency with the tuning control
or microphone UP/DWN key.
7. Press the CALL key.