Selecting An Operating Mode; Ssb (Lsb-Usb) Mode; Cw/ Cw-R Mode; Fsk/ Fsk-R/ Psk/ Psk-R Mode - Kenwood TS-890S Instruction Manual

4 BASIC OPERATIONS

Selecting an Operating Mode

Below are steps to select an operating mode. It is also possible to
configure the operating mode to DATA mode for data
communication.

SSB (LSB-USB) Mode

Press [LSB/USB].
Pressing [LSB/USB] each time switches between "LSB" and
"USB".
LSB
.

CW/ CW-R Mode

Press [CW/ CW-R].
Pressing [CW/ CW-R] each time switches between "CW" and
"CW-R".
CW
.

FSK/ FSK-R/ PSK/ PSK-R Mode

Press [FSK/PSK].
Pressing [FSK/PSK] each time switches between "FSK" and
"PSK".
• Pressing and holding down [FSK/PSK] each time in the
respective modes switches the reverse mode (FSK-R or
PSK-R).
FSK
FSK-R
.

FM/ AM Mode

Press [FM/AM].
Pressing [FM/AM] each time switches between "FM" and "AM".
• While in the FM mode, pressing and holding down [FM/AM]
each time switches between "FM" and "FMN" (FM Narrow).
FM
FMN
.
The mode and DATA mode settings are stored in the
●
band memory.
FM narrow and normal settings are stored in each of the
●
following band: HF/ 50 MHz/ 70 MHz (E type).
4-4

DATA Mode

This is a mode for performing data communication by connecting
an external device.
1 Press the mode key to configure to FM, AM or SSB
2 Press [DATA].
USB
CW-R

Auto Mode

By configuring the auto mode frequency point and the
corresponding operating mode in advance, the operating mode
will switch automatically when the frequency exceeds the auto
mode frequency point after it has been changed.
• Auto mode is a convenient function that allows automatic
switching of the operating mode according to the band plan.
PSK
• Up to 32 points can be configured for the auto mode frequency.

Turning ON/OFF Auto Mode

PSK-R
1 Press [MENU].
2 Press F [AUTO MODE] to display the Auto Mode
AM
.
3 Pressing F1 [A.MODE] each time switches the Auto
(LSB/USB) mode.
Pressing [DATA] each time switches between "DATA OFF"
and "DATA ON".
During LSB Mode
During USB Mode
During FM Mode
During FMN Mode
During AM Mode
Turn OFF the speech processor before performing data
●
communication.
Settings such as the method of standby and muting
●
audio input path that is not used during transmission can
be configured for each of the DATA OFF and DATA ON
statuses.
screen.
• If F [AUTO MODE] is not displayed, press F [MORE].
Mode to ON or OFF.
When the Auto Mode is turned ON, <<
This display disappears when Auto Mode is turned OFF.
DATA OFF DATA ON
LSB LSB-D
USB USB-D
FM FM-D
FMN FMN-D
AM AM-D
>> is displayed.