Microsd Memory Card; Inserting/ Removing A Microsd Memory Card; Formatting A Microsd Memory Card - Kenwood TH-D75A User Manual

microSD MEMORY CARD

SUPPORTED microSD MEMORY CARD
Note:
¡ A microSD memory card or microSDHC memory card is not
supplied with this transceiver. Purchase a commercially available
product.
¡ A microSDXC memory card can not be used with this transceiver.
The following table shows the microSD
microSDHC for which JVCKENWOOD has
memory card
verified operation.
In this manual, microSD
memory cards
cards are referred to as microSD
Memory Card
microSD
microSDHC
• Regardless of the above table, JVCKENWOOD does not
guarantee the operation of all microSD
• The operation of a microSD
other than the transceiver is not guaranteed.
• The larger the capacity of the microSD
the longer it takes to recognize the microSD
• Please note that the data in the microSD
be damaged or erased in cases such as the following.
• If the microSD
memory card
performing the [Safely Remove] operation (unmount).
• If the battery pack or battery case is removed during
operation.
• If the battery pack or alkaline batteries run out of power
during operation.
• If the power from an external power supply suddenly
stops without installing the battery pack.
Note:
¡ For precautions regarding the microSD memory card, refer to the
instruction manual of the microSD memory card.
¡ The file system is FAT32.
¡ Maximum number of files in a folder are 255 files.
INSERTING/ REMOVING A microSD MEMORY
CARD
Inserting (Mounting) a microSD Memory Card
1 Switch OFF the power of the transceiver.
2 Open the cap of the microSD memory card slot on the side.
3 Insert the microSD memory card.
• With the contacts of the microSD memory card at the
front, insert the microSD memory card into the [microSD
memory card slot] until you hear it lock into place with
a click. The transceiver automatically recognizes the
microSD memory card and <
display. It changes to always displayed if the card enters
the readable/writable state correctly.
Note:
¡ When inserting a microSD memory card, do not touch its contacts.
¡ Do not remove a microSD memory card while data is being written
or read. Doing so may cause the data on the microSD memory
card to be damaged or erased.
42
and
memory card
and microSDHC
memory
cards.
memory
Size
2 GB
4 GB
8 GB
16 GB
32 GB
s.
memory card
formatted with
memory card
used,
memory card
.
memory card
may
memory card
is removed without
> flashes on the
4 Close the cap.
Close the cap of the microSD memory card slot on the side
properly.
Note:
¡ Do not insert a microSD memory card the opposite way around or
use force to insert it. Doing so may damage the microSD memory
card or slot.
Removing (Unmounting) a microSD Memory Card
When removing a microSD memory card, be sure to perform
the operation to safely remove (unmount) it.
Note:
¡ Removing a microSD memory card without unmounting it correctly
may damage it.
1 Access Menu No. 820.
The microSD memory card is unmounted. When
unmounting is completed, the completed confirmation
screen appears.
2 Press [A/B].
Unmounting completes and the frequency screen
reappears.
3 Remove the microSD memory card.
• When removing a microSD memory card, push until you
hear it unlock with a click and remove it.

FORMATTING A microSD MEMORY CARD

When using a new microSD memory card, format the microSD
memory card as described below. All the data in the microSD
memory card will be erased when the microSD memory card
is formatted.
1 Insert the microSD memory card into the transceiver.
2 Switch ON the power of the transceiver.
3 Access Menu No. 830.
The format confirmation screen appears.
4 Press [A/B].
Formatting begins. When formatting is completed, the
completed confirmation screen appears.
5 Press [A/B] again.
Formatting completes and the frequency screen reappears.
microSD Memory Card
Slot
Cap
microSD Memory Card
(insert the metal contact
side)