Sony G363-ZR0-LAX1 User Manual page 169

Clip event: Recall a frame memory clip immediately after the snapshot is
Auto play: Play a frame memory clip immediately after the snapshot is
Table of available attributes
The attributes that can be used depend on the region, as follows.
Attribute
Cross-point hold
Key disable
Effect dissolve
Auto transition
GPI outputs
Clip event
Auto play
Attribute display
You can view the attributes of a snapshot in the Snapshot menu.
For more details, see "Snapshot Operations in the Menus" in Chapter 14
(Volume 2).
Temporary attributes
When recalling a snapshot, you can temporarily apply attributes distinct from
the attributes set for each register. These are called "temporary attributes."
You can set temporary attributes when recalling a snapshot.
For details of snapshot operations, see Chapter 14 "Snapshots" (Volume 2).
168
Snapshots
The trigger type depends on the switcher GPI output settings made in the
Setup menu.
For details, see "Interfacing With External Devices (Device Interface
Menu)" under "Setup Relating to Switcher Processor" in Chapter 16
(Volume 2).
recalled.
recalled.
Region
M/E-1, M/E-2, M/E-3, and
PGM/PST
Yes
Yes
Yes
Yes
Yes
No
No
Yes: Can be used No: Cannot be used
User 1 to User 8 DME ch 1 to
DME ch 8
Yes Yes
No No
Yes Yes
No No
Yes No
Yes No
Yes No