Sony G363-ZR0-LAX1 User Manual page 392

2
Press [Split], turning it on.
3
Set the following parameters.
Knob
1
2
Modifying the wipe pattern edge
1
In the M/E-1 >Wipe menu, select HF4 'Edge/Direction.'
The Edge/Direction menu appears.
2
In the <Edge> group, select the edge type.
Border: border
Soft: soft edge
Soft Border: soft border
For an overview of the edge types, see "Edge" (page 60).
3
Set the parameters according to the selection in step 2.
• When border is selected
Knob
1
• When soft edge is selected
Knob
1
• When soft border is selected
Knob
1
2
3
4
When you selected border or soft border, select the edge fill signal in the
<Edge Fill> group.
Utility 2 Bus: signal selected on the utility 2 bus
Matte: signal from the dedicated color matte generator
Parameter Adjustment
Split No Number of splits
Spacing Spacing between adjacent
patterns
Parameter Adjustment
Width Border width
Parameter Adjustment
Soft Edge softness
Parameter Adjustment
Width Border width
Inner Soft Border inner softness
Outer Soft Border outer softness
Setting values
1 to 4 (integer)
0.00 to 100.00
Setting values
0.00 to 100.00
Setting values
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
Basic Procedure for Wipe Settings
391