Sony G363-ZR0-LAX1 User Manual page 286

This returns the settings within the
function grouping to the default state,
and the [Default Recall] button goes
off.
Note
The default state of the settings depends on
the setting of the initial status mode, set in
the Setup menu of system setup, as follows.
User: The state when [Initial Status Define]
is executed.
Factory: Factory default settings
Returning knob parameters to
default state
1
Press the [Default Recall] button,
turning it on.
This enters the menu default recall
mode.
Menus allowing a return to default settings
Top menu selection button
name
M/E1
2
Notes
• In the following table, "Menus allowing a
return to default settings," the default
recall function does not apply to some
knob parameters. For details, see the
table, "Knob parameters subject to
restriction on default recall" on page 288.
• The default recall function does not
return the horizontal (H) and vertical (V)
position settings to their default state
individually. Returning the horizontal
(H) position to its default state also
returns the vertical (V) position to its
default state automatically, and vice
versa. For details, see the table, "Knob
parameters subject to restriction on
default recall" on page 288.
VF number Menu number
(HF number)
VF1 1110-series
VF2 1120-series
VF3 1130-series
VF4 1140-series
VF5 1150-series
VF6 1160-series
VF7 1170-series
Press the knob parameter button you
want to return to the default state.
This returns the knob parameter value
to the default state, and the [Default
Recall] button goes off.
Menu name
Key1
Key2
Key3
Key4
Wipe
DME Wipe
Misc
Basic Menu Operations
a)
a)
a)
a)
a)
a)
a)
285