Table of Contents
Advertisement
11
In the state in which you want to freeze, press one of the following in the
<Freeze> group, to write the freeze image to temporary memory.
Frame: Freeze one frame.
Field: Freeze one field.
Off: Release the freeze, and delete the recorded freeze image.
After carrying out the freeze, to return to the state immediately before the
freeze, press [Undo] in the <Freeze> group.
Notes
• All freeze images written to temporary memory are lost when the system
is powered off.
• If you change the frame memory to use as in step 2 before saving the
freeze images written to temporary memory, all the freeze images in
temporary memory are lost, unless the auto store function has been
enabled in setup. With the auto store function enabled, the freeze images
written to temporary memory are saved automatically when the frame
memory selection is changed.
Saving a processed freeze image
To save a processed freeze image as a file, in the Still >Composite menu use
the following procedure.
1
Press [Store].
The keyboard window appears.
2
In the keyboard window, enter the file name (maximum eight characters).
3
In the keyboard window press [Enter].
This saves the freeze image as a still image file in memory.
The destination folder is the folder selected in step 4 of "Combining the
background image and input signal" (page 445).
If the entered folder name already exists, a message to confirm overwriting
appears.
Selecting the way in which images are combined
To select the way in which the background image and input signal are
combined (see page 82), use the following procedure.
1
In the <Type> group of the Still >Composite menu, select one of the
following methods of combination.
• Pattern Key: pattern key
447
Still Image Operations
Advertisement
Table of Contents
