Table of Contents
Advertisement
5
6
7
8
9
10
446
Still Image Operations
Note
The folder selected here is the destination folder for writing the freeze
image.
It is not possible to change the selection of this folder after the following
step 5.
An orange bar appears on the selection button for the destination folder.
Press [Edit Enable], turning it on.
The signals of frame memory source buses 1 and 2 are assigned to the pair
of FMs selected in step 2, and the combining of the background signal (the
signal providing the background for combination) and the input signal (the
signal providing the foreground for combination) is now possible.
Note
The input signal is lowered by one line, but when you apply a freeze, the
freeze image is returned to the correct position.
To use a color matte signal for the input signal, press [Frgd Color], turning
it on.
Even when pair mode is enabled, you can make separate settings for each
FM.
Turn the knobs to adjust the following parameters.
Knob
Parameter
1
Luminance
2
Saturation
3
Hue
If you turned [Frgd Color] off in step 6, if required press [Input Adjust] to
display the Input Adjust menu, and make the video process (see page 442)
and mask (see page 443) settings for the input signal.
To set the background signal to black, press [Bkgd Black], turning it on.
Notes
• When the background signal is originally black, [Bkgd Black] remains
on.
• When the background signal is a freeze image (an image frozen, but not
saved), turning [Bkgd Black] on erases the unsaved freeze image and, as
a result, [Bkgd Black] remains on.
In the <Type> group, set the type of combination (see page 447).
Adjustment
Luminance
Saturation
Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Advertisement
Table of Contents
