Table of Contents
Advertisement
• When the limit value is set to the maximum 100%, the image changes in
exactly the same way as when the pattern limit function is off, but when the
transition is completed, the cross-point selections on the background A and
B buses do not interchange.
You can specify the limit value either by entering a numeric value in the menu,
or by operating the fader lever to set the fader lever position. (See "Pattern
Limit" (page 315).)
Note
The pattern limit function is not available in an independent key transition.
Fade to black
The PGM/PST bank provides a fade-to-black function, controlled with the
[FTB] button in the fade to black control block. (See "Fade to Black" (page
329).)
Note
In multi-program mode or DSK mode, it is possible to carry out a fade-to-black
on a number of programs simultaneously.
You can also make a Setup menu setting such that a fade-to-black does not
apply to particular programs.
For details of the setting, see "Settings Relating to Video Switching (Transition
Menu)" in Chapter 16 (Volume 2).
44
Transitions
Advertisement
Table of Contents
