Table of Contents
Advertisement
To set the timing of transition completion
1
2
Applying a border to a key DME wipe
In the <Edge> group of the Key1 DME Wipe Adjust menu, press [Border],
turning it on.
For subsequent operations, use the same process as in step 4 of "Modifying the
DME wipe pattern edge" (page 416).
426
DME Wipe Settings for Independent Key Transitions
The Remove From Begin menu appears.
For subsequent operations, see step 5 of "To set the action when a DME
wipe crop transition is executed" (page 420).
In the <Crop Mode> group of the Key1 DME Wipe Adjust menu, press
[Crop], turning it on.
In the <Crop Mode> group, press [Remove From Begin]..
For subsequent operations, see "Setting the timing of transition
completion" (page 421).
Advertisement
Table of Contents
