Table of Contents
Advertisement
Note
The Wind function is not supported on the MVE-8000A.
Spotlighting
Creates the effect of a spotlight striking the surface of the image.
You can set up to three light sources (lights 1 to 3).
Notes
• The Spotlighting function is not supported on the MVE-8000A.
• The BZS-9471 Texture Lighting Software (for BKDS-9470) or BZDM-9050
Texture Lighting Software (for MVE-9000) is required to set lights 2 and 3.
Adjustments to the image surface
The following adjustments can be made to the image surface struck by the
light.
• Adjusting the brightness of the whole image
• Selecting the image surface effect
Flat: The image surface is unchanged, causing the selected light source to
appear as the effect.
Texture: A texture appears on the surface of the image. Textures can be
selected from among 30 patterns.
See the appendix "Texture Patterns" (Volume 2) for the texture
patterns.
Non Linear: Spotlighting effect is applied to an area to which a DME
nonlinear effect is applied.
Note
The BZS-9471 or BZDM-9050 is required to enable Texture and Non
Linear settings.
Digital Multi Effects (DME)
127
Advertisement
Table of Contents
