Table of Contents
Advertisement
Importing or exporting files to or from frame memory
Import: Import a file in a different format from hard disk or memory card into
frame memory after changing its format.
Export: Export a file in a register to hard disk or memory card after changing
its format.
You can import TIFF, BMP, and TARGA files as follows into frame memory.
File type
TIFF file
BMP file
TARGA file
a) Windows is a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.
Note
This functionality has been tested and confirmed to work with TIFF files
created by Photoshop, but it may not be possible to use TIFF files created
with some other software. (Photoshop is a trademark of Adobe Systems
Incorporated.)
About import image size
Pay attention to the following, depending on the signal format which you use.
The image size which exactly fills the full screen is 720 × 487 in the 480i/59.94
format, and 720 × 576 in the 576i/50 format.
The following figure shows how an import image is processed when the 480i/
59.94 format is used.
Images are placed with the upper left of the screen as the origin.
When an image is smaller than the screen, the remainder of the screen is filled
with black. When it is larger, parts which extend beyond the screen are
discarded.
Format
File name
RGB
Maximum eight
uncompressed
characters, plus
format
extension .tif required
a)
Maximum eight
Windows
24-
characters, plus
bit format
extension .bmp required
RGB
Maximum eight
uncompressed/
characters, plus
compressed
extension .tga required
format
Notes
• Layers cannot be used.
• If an alpha channel is
present, two files are
created as a pair.
–
• Layers cannot be used.
• If an alpha channel is
present, two files are
created as a pair.
Files
187
Advertisement
Table of Contents
