Sony G363-ZR0-LAX1 User Manual page 354

Knob
2
3
7
To make the edge soft, press [Soft Edge] to set it on, and adjust the
softness.
Knob
1
For a normal edge, when [Soft Edge] is enabled, [Key Drop] is kept on.
8
To make separate fine adjustments to the positions of the left, right, top,
and bottom of the source edge, press [Fine Key], to set it on, and adjust the
following parameters.
Knob
1
2
3
4
Knob
1
2
Note
In the emboss function it is not possible to set [Fine Key] on.
• When the edge type is normal, drop border or shadow, enabling the [Fine
Key] function keeps [Key Drop] on.
• When applying a border to the key edge, enabling the [Fine Key]
function halves the border width setting range.
Carrying out a color mix for the key edge fill matte
When you select 'Matte' for the edge fill of a border, drop border, or shadow,
you can create a combination of color 1 and color 2 using a wipe pattern
generated by the dedicated pattern generator.
Parameter Adjustment
Saturation Saturation
Hue Hue
Parameter Adjustment
Soft Edge softness
Parameter group [1/2]
Parameter Adjustment
Top Key top edge position
Left Key left edge position
Right Key right edge position
Bottom Key bottom edge position
Parameter group [2/2]
Parameter Adjustment
H Phase Key horizontal position
V Phase Key vertical position
Setting values
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
Setting values
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
–2.00 to +2.00
Setting values
Left edge position
value shown
Top edge position
value shown
Key Setting Operations Using Menus
353