System Configuration; Access The Web Configuration Interface - Crestron 1 Beyond Automate VX Series Product Manual

Table of Contents

Advertisement

System Configuration

Automate VX can be configured using its web configuration interface as described in the sections that
follow.
NOTE: Most system configurations can be accomplished by using the
Designer
tool. This tool is available on the Crestron website and locally on the Automate VX. For
more information on using the tool, refer to

Access the Web Configuration Interface

To access the web configuration interface for the Automate VX, open the Chrome® browser on the
Automate VX. The web configuration interface loads automatically.
To access the web configuration interface from a different device:
1. Enter the IP address of the Automate VX system with port 3579 appended to the address (for
example, "10.1.10.31:3579")
A login page is displayed.
Login Page
2. Enter the following login credentials:
username: admin
l
password: 1beyond
l
3. Select Login.
93 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B
Room Designer on page 29
Intelligent Video Room
Product Manual — Doc. 9324F

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iv-sam-vxn-1bIv-sam-vxp-1bIv-sam-vxs-1b

Table of Contents