Advanced Settings - Crestron 1 Beyond Automate VX Series Product Manual

Advanced Settings

Select the Advanced tab to view the available advanced settings.
Advanced Tab
The following advanced settings can be configured.
Room Configurations
The Room Configurations setting allows for different microphones and room furniture arrangements to
be used. This is especially helpful within divisible and multipurpose rooms.
Each room configuration saves a separate copy of all the settings in the Automate VX.
Room Configuration Settings
Each layout is given an ID number and corresponds to the associated configuration name.
To add additional configurations, select Add Config. A new configuration will be added with the
l
next available numbered ID.
To remove the currently selected configuration, select Remove Current Config. The currently
l
selected configuration is indicated by the drop-down menu on the top of the settings menu. This
will remove it from the Automate VX and Room Designer.
NOTE: Ensure that projects are saved within Room Designer and exported to a local drive
before removing configurations. If a configuration is unintentionally removed and needs to be
restored, contact
To change the name of a configuration, it must be done within Room Designer. For more information,
refer to Room Designer on page
105 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B
Crestron True Blue Support.
29.
Product Manual — Doc. 9324F