Cameras Menu - Crestron 1 Beyond Automate VX Series Product Manual

Cameras Menu

Select the Cameras tab to view and select individual cameras for manual control.
Cameras Menu Selections
To select a camera for manual control, select a button under Cameras that corresponds to the desired
camera. The live shot will change to the selected camera immediately.
Use the PTZ Control settings to manually change the direction and zoom of the selected camera. These
PTZ movements will not save, and once AutoSwitching is enabled, it will override any inputs selected
here. To change how cameras interact when AutoSwitching, refer to Room Designer on page 29.
If using a camera that supports tracking, the Start Track and Stop Track buttons are used to start and
stop tracking, respectively.
165 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F