Configuring Virtual Mics And Blocking Zones - Crestron 1 Beyond Automate VX Series Product Manual

Duplicate Device
Select the Duplicate Device button to create a copy of the currently selected Microphone Device. Once
the button is clicked, click again in the desired location for the copied Microphone Device. This also
duplicates all Virtual Mic positions, Blocking Zone positions, and Adjudicator settings as well.
Microphone Device Duplicate Device Setting

Configuring Virtual Mics and Blocking Zones

Virtual Mics represent the active speaking participants positions in Room Designer. These are most
often seats but can be used for standing positions too. Virtual Mic locations in the room layout are
markers for the Microphone Devices to pick up the speaking positions. The respective cameras will then
switch to the Virtual Mic location.
Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 70