Shure Intellimix® Room And P300 Configuration For Automate Vx - Crestron 1 Beyond Automate VX Series Product Manual

Shure Intellimix® Room and P300 Configuration for
Automate VX
The following items are required to integrate a Shure Intellimix® DSP with Automate VX:
IV-SAM-VXS-1B, IV-SAM-VXP-1B, or IV-SAM-VXN-1B.
l
A computer with the latest version of Shure Intellimix® Room Audio Processing software.
l
(Optional) A Shure IntelliMix® P300 Audio Conferencing Processor.
l
Before configuring the Shure Intellimix DSP to communicate with Automate VX, complete the following
procedure to open the Shure Intellimix® project file:
1. Open Shure Intellimix Room Audio Processing software on a computer. Ensure that it is the
newest version of the software.
2. Select File in the top left corner of the software.
3. Select Open, then select the project for the room that is going to be used with Automate VX.
Command Strings
Command strings must be enabled for Shure Intellimix to communicate with Automate VX. To enable
command strings:
1. Double click with the left mouse button on the DSP device in the project.
2. Select the gear icon on the top right of the software.
153 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F