Biamp Tesira™ Configuration For Automate Vx - Crestron 1 Beyond Automate VX Series Product Manual

Biamp Tesira™ Configuration for Automate VX
The following items are required to integrate a Biamp Tesira™ DSP with Automate VX:
IV-SAM-VXS-1B, IV-SAM-VXP-1B, or IV-SAM-VXN-1B.
l
Biamp TesiraFORTÉ™ or Biamp Tesira SERVER™.
l
A computer with the latest version of Tesira Design software.
l
Before configuring the Biamp Tesira DSP to communicate with Automate VX, complete the following
procedure to open the Tesira Design project file:
1. Open Tesira Design software on a computer. Ensure that it is the newest version of the software.
2. Select File in the top left corner of the software.
3. Select Open, then select the project for the room that is going to be used with Automate VX.
Gating Mixer
A dedicated gating mixer is required in the Tesira project for Automate VX to communicate with the
DSP. To add and configure a gating mixer to the Tesira Design project file:
1. On the Object Toolbar, select the Mixers button
133 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B
to open the drop-down menu.
Product Manual — Doc. 9324F