Table of Contents
Advertisement
Installation
Use the following procedures to install the Automate VX.
In the Box
Qty.
1
IV-SAM-VXS-1B, IV-SAM-VXN-1B, or IV-SAM-VXP-1B Automate™ VX Camera Switcher
Additional Items
2
Rail, 20 in. (508 mm) (2060809)
1
Power Supply, 400 W (2060806)
1
Power Cord, IEC (2060805)
1
Wi-Fi™ Network Antenna
1
SDI to HDMI® Signal Converter (2060804)
1
Feet Set, Chassis (2060809)
IV-SAM-VXS-1B and IV-SAM-VXP-1B Only
1
Mini DisplayPort™ to HDMI (male) Signal Cable (2060802)
IV-SAM-VXN-1B Only
1
DisplayPort™ to HDMI Female Adapter (2060914)
IV-SAM-VXP-1B Only
8
Cable, MiniDIN to BNC (2060814)
8
Ferrite Cable Clamps (2060810)
Wire the Camera System
To perform basic wiring for the camera system:
1. Designate a number for each PTZ camera in your system.
2. Mount the cameras as described in the appropriate
model.
Product Manual — Doc. 9324F
Description
documentation for your 1 Beyond camera
IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 20
Advertisement
Table of Contents
