Configuring Camera Devices - Crestron 1 Beyond Automate VX Series Product Manual

Notes Page
Select the Notes tab on the left-hand side of the Room Designer page to access the notes page.
Information or any notes about the current room configuration can be placed here and will be saved for
future use.

Configuring Camera Devices

Camera Devices are the camera outputs that the Automate VX uses to display the camera feed.
Camera Devices are indicated in Room Designer as pentagon-shaped nodes. For more information
about adding cameras to a room layout, refer to Add Camera Device on page 38.
Product Manual — Doc. 9324F IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 52