Room Designer; Access The Web Configuration Interface - Crestron 1 Beyond Automate VX Series Product Manual

Room Designer

Automate VX contains the Room Designer tool that uses the scaled floor plan (in the form of an image)
to create a framework for how the Automate VX operates. Automate VX relies on audio gating or
positional information provided by third-party devices in order to determine where an active speaking
participant is located in a room. Room designer links third-party audio logic information to camera
behavior.
The Automate VX system can be configured using its web configuration interface as described in the
sections that follow.

Access the Web Configuration Interface

To access the web configuration interface for the Automate VX, open the Chrome® browser on the
Automate VX. The web configuration interface loads automatically.
To access the web configuration interface from a different device:
1. Enter the IP address of the Automate VX with port 3579 appended to the address (for example,
"10.1.10.31:3579")
A login page is displayed.
Login Page
1. Enter the following login credentials:
username: admin
l
password: 1beyond
l
29 • IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B Product Manual — Doc. 9324F