User Name; Area Assignment; Timer Groups - Bosch Solution 16i User Manual

Solution 16 User Guide
i
Access > User Properties >

User Name

This menu allows the master user to program the user's
name. A maximum of 16 characters can be entered in this
field. Use the [←] and [→] keys to scroll the cursor left and
right to view the entire user name.
The text programming procedure is very similar to that of
most mobile phones. Refer the Programming Text section
on page 10 for more details.
User names are stored with associated events in the
system's history log. This enables accurate auditing of user
movements at a later time if required. Names are also used
when reporting alarms and arm /disarm events in SMS and
other text based reporting formats.
Each user has a default name which can be changed if
desired. The default names are as follows.
D E FAULT US E R NAM E S
User Number
1
2
↓
48
Table 8: Default User Names
To change a user name,
1. Enter your Master PIN + [MENU].
2. Enter [1] + [4] + [0] + [OK].
The keypad will display the Ur = prompt.
3. Enter the user number who's name you want to
change, then press [OK].
The keypad will display the current User Name.
The cursor position is displayed by the flashing
character in the name.
4. Use the 0 to 9, [←] and [→] keys to change the user
name text as required. At any time you can use the
[↑] and [↓] keys to scroll through the complete list of
available characters.
To clear all text from the cursor position to the right,
press the [OFF] key.
5. When the user name is complete, press [OK] to save
and exit, or press [MENU] to exit without saving.
14
UrnAME
MENU 1-4-0
Default Name
USEr 1 nAmE
USEr 2 nAmE
↓
USEr 48 nAmE
Ur=
USEr 5
Access > User Properties >

Area Assignment

This menu allows the master user to program which area(s)
(1 to 4) a user operate. The master user can only assign
another user to any one or multiple areas that the master
user has been assigned to. At factory default, each user is
assigned to operate Area 1.
1. Enter your Master PIN + [MENU].
2. Enter [1] + [4] + [1] + [OK].
The keypad will display the Ur = prompt.
3. Enter the user number who's area assignment you
want to change, then press [OK].
Zone numbers 1 to 4 area used to display which areas
that the user has access to.
1 2
4. Use keys [1] to [4] to toggle the area assignment on
or off.
5. Press [OK] to save and exit, or press [MENU] to exit
without saving.

Timer Groups

Timer Groups can be used to prevent various users from
operating the system outside given times of the day, days
of the week or even holiday periods.
This functionality can only be configured on your system
by the installer. Master users can assign other users to a
specific timer group as well as adjust the schedule start and
stop times and also the days of the week that the schedule
will operate.
Multiple schedules can be associated to a timer group,
however users can only belong to one timer group. For
example, to allow a group of users to operate the system
between 8am and 5pm on Mon, Tue, Wed and Fri, 1 schedule
(Sh1) is required. To allow operation between 8am and
9.30pm on Thu, a second schedule (Sh2) is required.
Once the schedule(s) have been created, your installer will
link them to a timer group, and advise you which timer
group number has been used.
Master users can now restrict the user(s), by linking them
to the appropriate timer group.
UrArEA
MENU 1-4-1
Ur=
-Bit-
4
Bosch Security Systems 6/09 BLCC500U FTR1.03