Primary Dest 1; Secondary Dest 1; Primary Dest 2; Secondary Dest 2 - Bosch Solution 16plus Installation Manual

account number and pass code (PIN) to access the telephone
line exchange when using a pre-paid telephone account (e.g.
Telstra Communic8 Pre-Paid Home account), or when a number
followed by a pause is required to get an outside line on a PABX
system.
The number prefix is global for all telephone numbers
programmed in both Destination 1 and Destination 2 (including
the domestic telephone numbers and call forward sequences).
the prefix will be dialled immediately before the number.
1) Enter [MENU] + [5] + [1] + [0]. The keypad will display the
current Telco Number Prefix.
Number Prefix P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number prefix. You can change a single digit by scrolling the
cursor left or right. For special characters including, pause, *
or #, use the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >

Primary Dest 1

1
This menu sets the primary telephone number for Report
Destination 1. This will typically be the primary base station
receiver number.
1) Enter [MENU] + [5] + [1] + [1]. The keypad will display the
current Primary Telephone Number for Destination 1.
Primary Dest 1 P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number. You can change a single digit by scrolling the cursor
left or right. For special characters including, pause, * or #, use
the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >

Secondary Dest 1

1
This menu sets the secondary telephone number for Destination
1. This will typically be the secondary base station receiver
number.
Bosch Security Systems 05/10 BLCC100I
MENU 5-1-1

Digits
MENU 5-1-2

Digits
Solution 16
plus
Enter [MENU] + [5] + [1] + [2]. The keypad will display the
1)
current Secondary Telephone Number for Destination 1.
Secondary Dest 1 P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number. You can change a single digit by scrolling the cursor
left or right. For special characters including, pause, * or #, use
the up and down arrow keys.
Press [OK] to save and exit or press [MENU] to exit without
3)
saving.
Comms > Telephone Number >

Primary Dest 2

1
This menu sets the primary telephone number for destination
2. This location will typically be required when the panel is
configured for dual reporting.
1) Enter [MENU] + [5] + [1] + [3]. The keypad will display the
current Primary Telephone Number for Destination 2.
32
Primary Dest 2 P001
Press  0-9 OK to SAVE
2) Using the numeric keys, enter all the digits of the telephone
number. You can change a single digit by scrolling the cursor
left or right. For special characters including, pause, * or #, use
the up and down arrow keys.
3) Press [OK] to save and exit or press [MENU] to exit without
saving.
Comms > Telephone Number >

Secondary Dest 2

1
This menu sets the secondary telephone number for Destination
2. This location will typically be required when the panel is
configured for dual reporting.
1) Enter [MENU] + [5] + [1] + [4]. The keypad will display the
current Secondary Telephone Number for Destination 2.
32
Secondary Dest 2 P001
Press  0-9 OK to SAVE
Installation Manual Comms Programming
 

Digits

Digits
MENU 5-1-3
32
MENU 5-1-4
32
9-3