Using Fax Server To Send A Fax (Fax Server Transmission) - Kyocera ECOSYS M3645dn Operation Manual

Operation on the Machine > Sending
Using fax server to send a fax
(fax server transmission)
You can send a scanned document through a fax server.
NOTE
To use this function, you must have a fax server. For information on your fax server, ask your administrator.
Configuring Settings before Sending
Before sending a fax, the following setting is required.
• Configure the fax server settings.
FAX Server Settings (page 8-23)
Command Center RX User Guide
Using fax server to send a fax
1
2
3
4
Select the [Send] key.
Place the originals.
Place the originals.
Loading Originals (page 5-2)
[▲] [▼] key > [FAX Server] > [OK] key
Specifying destination.
Entering the destination fax number with the numeric keys
1
Select [Fax No. Entry].
2
Enter the fax number.
NOTE
Use the numeric keys to enter a number.
3
Select [OK] key.
Destinations can be changed later.
Checking and Editing Destinations (page 5-20)
5-27