Remote Control - Ricoh PENTAX K-1 II Operating Manual

2
Use CD to select O, P, or Y.
Self-timer (shutter release after about 12
O
seconds)
Self-timer (shutter release after about 2 seconds)
P
Y Self-timer + Continuous Shooting
Proceed to Step 6 when O or P is selected.
3
3
Press G.
4
Set [Shooting Speed] and
[Number of Shots].
5
Press E.
The screen of Step 1 reappears.
6
Press E.
The camera returns to standby mode.
7
Press 0 halfway, and then fully.
The shutter is released after about 12 seconds or 2
seconds.
64
1
2
Self-timer + Continuous Self-timer + Continuous
Shooting Speed Shooting Speed
Number of Shots Number of Shots 3 3 times times
Cancel Cancel OK OK
3
4
5
6
7
8

Remote Control

Select Q on the Drive Mode
screen and press B.
Use CD to select Q, R, or S.
Q Remote Control
Remote Control (shutter release after about 3
R
seconds)
S Remote Control + Continuous Shooting
Proceed to Step 6 when Q or R is selected.
Press G.
Set [Shooting Speed].
Press E.
The screen of Step 1 reappears.
Press E.
The camera returns to standby mode.
Press 0 halfway.
Point the remote control unit towards the remote
control receiver on the front of the camera, and
press the shutter release button on the remote
control unit.
Remote Control Remote Control
Cancel Cancel OK OK
Remote Continuous Shooting Remote Continuous Shooting
Shooting Speed Shooting Speed
Cancel Cancel OK OK