Table of Contents
Advertisement
Flash On
D
+ Red-eye
Slow-
E
speed Sync
3
Slow Sync
F
+ Red-eye
Available operations
R
Compensates the flash exposure.
Resets the compensation value to the
M
default setting.
3
Press E.
4
Press F.
The camera returns to standby mode.
t Memo
• The flash modes that can be selected vary depending on the
capture mode.
Capture Mode
R
G, H, J
I, K, L, M, N
• When the flash is used in J mode, the shutter speed
automatically changes over a range from 1/200 seconds to a
slow shutter speed depending on the lens being used. The
shutter speed is locked at 1/200 seconds when a lens other
than a D FA, DA, DA L, FA, FA J, or F lens is used.
• When the flash is used in I, K, or L mode, any desired
shutter speed of 1/200 seconds or slower can be set.
• When [Flash Mode] is assigned to X or Y, you can display
the Flash Mode screen in Step 2 by a simple button operation.
(p.97)
72
Discharges a pre-flash for red-eye
reduction before the main flash for
each picture.
Sets to a slow shutter speed and
discharges a flash for each picture.
Use this, for example, when shooting a
portrait with the sunset in the
background.
Discharges a pre-flash for red-eye
reduction before the main flash is
discharged with Slow-speed Sync.
Selectable Flash Mode
A, B, C, D
C, D, E, F
C, D
Controlling the Image Finishing
Tone
Custom Image
1
Press D in standby mode.
The Custom Image setting screen appears.
2
Select an image finishing
tone.
Auto Select
Bright
Natural
Portrait
Landscape
Vibrant
Radiant
Available operations when shooting with the
viewfinder
Main switch to U
Uses Digital Preview to preview
the background image with the
selected setting applied.
Saves the preview image (only
H
when the image can be saved).
Proceed to Step 6 when [Auto Select] is selected or if you
do not need to change the parameters.
Bright
Bright
±0 ±0 ±0 ±0 ±0 +1 +1 +1 +1
±0
Parameter Adj.
Parameter Adj.
Cancel
Cancel
Check
Check
OK
OK
Muted
Flat
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
Advertisement
Table of Contents
