Selecting Settings To Save In The Camera - Ricoh PENTAX K-1 II Operating Manual

4
After entering the text, move the text selection
cursor to [Finish], and press E.
The [Rename USER Mode] screen reappears.
Using the Saved USER Mode
1
Set the mode dial to O to 5.
The USER mode name is
displayed.
Use AB to check the saved
settings.
2
Change the settings as necessary.
6
The exposure mode can be
changed in [Exposure Mode] of
the A1 menu.
t Memo
• The settings changed in Step 2 are not saved as the USER
mode settings. When the camera is turned off, the camera
returns to the originally saved settings. To change the original
settings, save the USER mode settings again.
102
The setting values for most functions of this camera are saved
even if the camera is turned off. For the following function
settings, you can select whether to save the settings (Z) or to
return the settings to their default values (Y) when the camera
is turned off.
Set in [Memory] of the A5 menu.
ABCDEFGHIJKLMNOPQR ABCDEFGHIJKLMNOPQR
5.6 5.6
2 5 0 2 5 0
1/ 1/ F F
1 6 0 0 1 6 0 0
Exposure Mode Exposure Mode
Exposure Mode Exposure Mode
Program Line Program Line
t Memo
• When [Reset] of the D4 menu is performed, all Memory
Cancel Cancel OK OK
Selecting Settings to Save in the
Camera
Sensitivity
EV Compensation
Flash Mode
Flash Exposure Compensation Composition Adjust.
Drive Mode
White Balance
Custom Image
Clarity
Skin Tone
settings return to the default values.
A5
Digital Filter
HDR Capture
Pixel Shift Resolution
Playback Info Display
Operation Control Lock
Outdoor View Setting
Night Vision LCD Display