Mirror Lock-Up Shooting - Ricoh PENTAX K-1 II Operating Manual

6
Set the number of shots and bracket value.
Available operations
Sets the number of shots.
Q
Changes the bracket value.
R
Adjusts the exposure compensation
JR
value.
3
Resets the compensation value to the
M
default setting.
7
Press E.
The camera returns to standby mode.
8
Shoot.
After pictures are taken, the camera returns to standby
mode.
t Memo
• The bracket value can be set in increments of 1/3 EV steps or
1/2 EV steps according to the [1 EV Steps] setting of the E1
menu.
• The following settings for Bracketing can be set in the E2
menu.
11 Bracketing Order
12 One-Push Bracketing
• You can switch between [Single Frame Shooting] and
[Bracketing] and change the bracket value for [Bracketing]
using the Smart Function. (p.22)
66
Changes the shooting order of
pictures.
Takes all pictures with one
release of the shutter.

Mirror Lock-up Shooting

1
Select c on the Drive
Mode screen and press B.
2
Use CD to select c or d.
c Mirror Lock-up Shooting
Mirror Lock-up Shooting + Remote Control
d
3
Press E.
The camera returns to standby mode.
4
Press 0 halfway, and then fully.
The mirror pops up and the AE Lock function is activated.
5
Press 0 fully again.
The mirror returns to its original position after the image is
taken.
t Memo
• The mirror automatically returns to its original position if 1
minute elapses after the mirror pops up.
u Caution
• Mirror Lock-up Shooting cannot be selected when shooting
with Live View.
Mirror Lock-up Shooting Mirror Lock-up Shooting
Cancel Cancel OK OK