Ricoh PENTAX K-1 II Operating Manual page 62

Contrast AF
1
Turn R while pressing
b.
3
Face
e
Detection
f Tracking
Multiple AF
g
Points
h Select
i Spot
Select from [Multiple AF Points], [Select], or [Spot] in C
mode.
Proceed to Step 2 when [Multiple AF Points] or [Select] is
selected.
60
Face Detection Face Detection
1/ 1/ 2000 2000 F2.8 F2.8 1600 1600
Detects and tracks faces of people.
The main face detection frame for AF
and AE is displayed in yellow.
Tracks the subject in focus.
The shutter can be released even if the
subject is not in focus.
Sets the focusing area to the desired
area.
The sensor is divided into 35 areas (7
horizontal by 5 vertical), and you can
select a wider or narrower focusing
area by using 1, 9, 15, or 25 of those 35
available areas.
Sets the focusing area by the pixel.
Sets the focusing area to a limited area
at the center.
2
Press c.
3
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
ABCD
R
M
9999 9999
4
Press E.
The AF area is set.
t Memo
• In R mode, [Contrast AF] is fixed to [Face Detection].
Changes the position of the AF area.
Increases/reduces the size of the AF
area (when g is selected).
Returns the AF area to the center.
OK OK