Ricoh PENTAX K-1 II Operating Manual page 60

AF Mode
1
Turn Q while pressing
b.
3
When 0 is pressed halfway and the
x subject comes into focus, the focus is
Single mode locked at that position.
The AF assist light turns on as necessary.
The subject is kept in focus by continuous
y adjustment while 0 is pressed
Continuous halfway.
mode The shutter can be released even if the
subject is not in focus.
u Caution
• In R mode, the autofocus mode is fixed to x.
58
AF Active Area (AF Point)
1
2 5 0 2 5 0 5.6 5.6
1/ 1/ F F
1 6 0 0 1 6 0 0
99999 99999
99999 99999
Turn R while pressing
b.
Auto Out of the 33 AF points, the camera
(33 AF automatically selects the optimum
K
Points) focusing area.
Out of the selected 9 AF points, the
Zone
camera automatically selects the
I
Select
optimum focusing area.
Sets the focusing area to the user
E Select
selected point from 33 points.
Sets the focusing area to the user selected
point from 33 points. When the subject
Expanded
happens to move out of the selected focusing
F Area AF
area after being focused, 8 peripheral points
(S)
are used as back-up points.
Available only in y mode.
Sets the focusing area to the user selected
point from 33 points. When the subject
Expanded
happens to move out of the selected focusing
G Area AF
area after being focused, 24 peripheral
(M)
points are used as back-up points.
Available only in y mode.
Sets the focusing area to the user selected
point from 33 points. When the subject
Expanded
happens to move out of the selected focusing
H Area AF
area after being focused, 32 peripheral
(L)
points are used as back-up points.
Available only in y mode.
Sets the focusing area to the center of
D Spot
the 33 points.
Proceed to Step 2 when a mode other than [Auto (33 AF
Points)] or [Spot] is selected.
2 5 0 2 5 0 5.6 5.6
1/ 1/ F F
1 6 0 0 1 6 0 0
99999 99999
99999 99999