Remote Control; Exposure Bracketing - Ricoh PENTAX K-3 II Operating Manual

Remote Control

1
Press A in standby mode.
The Drive Mode screen appears.
2
Select Q and press B.
3
3
Select Q, R, or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4
Press the shutter release button halfway.
5
Point the remote control unit towards the remote
control receiver on the front or back of the camera,
and press the shutter release button on the remote
control unit.
t Memo
• The maximum operating distance of the remote control unit
is approx. 4 m from the front of the camera and approx. 2 m
from the back of the camera.
• To adjust focus with remote control, set in [19. AF with
Remote Control] of the E3 menu.
• When using the Remote Control Waterproof O-RC1, the
autofocus system can be operated with the q button
on the remote control unit. The r button cannot be used.
52

Exposure Bracketing

1
2
Remote Control Remote Control
3
4
Cancel Cancel OK OK
5
6
7
Press A in standby mode.
The Drive Mode screen appears.
Select T and press B.
Select T, 1, or U and press B.
Use Q to select the number of shots.
Select from [2 images (+)], [2 images (-)], [3 images],
or [5 images].
Set the bracket value.
Available operations
Changes the bracket value (up to ±2 EV).
R
Adjusts the exposure compensation value.
J→R
Resets the compensation value to the
M
default setting.
Press E.
The camera returns to standby mode.
Take the set number of pictures.
After pictures are taken, the camera returns to standby
mode in Step 6.
Exposure Bracketing Exposure Bracketing
3 images 3 images ±0.3EV ±0.3EV
Cancel Cancel OK OK