Recording The Camera Route (Gps Logging) - Ricoh PENTAX K-1 II Operating Manual

Recording the Camera Route (GPS
Logging)
1
Select [GPS/E-Compass] in D2 menu and press
D.
The [GPS/E-Compass] screen appears.
2
Select [GPS Logging] and press D.
The [GPS Logging] screen appears.
The GPS automatically turns on.
3
Set the logging conditions.
Select from [5sec.], [10sec.],
Logging Interval
[15sec.], [30sec.], or [1min.].
Select from [1hr.] to [24hr.].
(When [Logging Interval] is set to
Logging Duration [5sec.], select from [1hr.] to [9hr.].
When [Logging Interval] is set to
[10sec.], select from [1hr.] to [18hr.].)
Memory Card
Select the SD1 card or the SD2 card.
Options
4
Select [GPS Logging] and press D.
The confirmation screen appears.
5
Select [Start] and press E.
GPS logging starts.
The screen of Step 3 reappears.
u Caution
• GPS log data cannot be recorded when the camera is
connected by USB to a computer.
t Memo
• During GPS logging, "LOG" is displayed under the GPS
D2
• Select [Exit] in Step 5 to stop GPS logging. A GPS log file is
• When the GPS is turned off by pressing 4, GPS logging
• If there is GPS log data to be saved as a log file, "LOG END"
GPS Logging GPS Logging
GPS Logging GPS Logging
Logging Interval Logging Interval 15sec. 15sec.
Logging Duration Logging Duration 1 1 hr. hr.
Memory Card Options Memory Card Options
• During GPS logging, you cannot change the settings of
• A log file (KML format) is saved in the "GPSLOG" folder on
• You can display the camera route on Google Earth, etc. by
positioning status icon on the status screen and Live View
screen. When the time set in [Logging Duration] elapses,
"LOG END" is displayed and a GPS log file is saved.
saved.
stops temporarily. (The countdown for [Logging Duration]
continues.) GPS logging starts again when the GPS is turned
on.
is displayed in [GPS Logging] on the screen of Step 3. Select
[Save] in Step 5 to save the GPS log data as a log file. "LOG
END" is displayed also when the power is turned off due to
low battery level or when the battery is replaced. In this case,
save the GPS log file before restarting GPS logging.
[Logging Interval] and [Logging Duration].
the memory card with a file name of a sequential number from
001 to 999 and month and day (example: 001_0505).
However, if there is no GPS log data to be saved, neither a
log file nor a folder is created. In addition, if the log file
"999_" has been saved, a new log file cannot be saved.
transferring a log file to a computer and importing it.
3
81