Setting The Drive Mode - Ricoh PENTAX K-1 II Operating Manual

t Memo
• Optical Preview is always used in the following situations
regardless of the setting.
• When the drive mode is set to [Mirror Lock-up Shooting],
[Multi-exposure], or [Interval Shooting]
• When using the ASTROTRACER function
• In C mode
u Caution
3
• The effects of some functions cannot be checked during
Digital Preview or are not applied to the saved preview image.
62

Setting the Drive Mode

1
Press A in standby mode.
The Drive Mode screen appears.
2
Select a drive mode.
Single Frame
Shooting Normal capture mode
(L)
Continuous
Continuously takes pictures while
Shooting
0 is kept pressed. (p.63)
(Z/a/b)
Releases the shutter about 12
Self-timer
seconds or 2 seconds after 0 is
(O/P/Y)
pressed. (p.63)
Remote Control Enables shooting with remote control.
(Q/R/S) (p.64)
Bracketing Takes consecutive pictures at
(T/1/U) different exposure levels. (p.65)
Mirror Lock-up
Takes images with the mirror raised.
Shooting
(p.66)
(c/d)
Creates a composite image by taking
Multi-exposure
multiple pictures and merging them
(V/z/W/X)
into a single image. (p.67)
Interval Shooting Automatically takes pictures at set
(q/U/V/w) intervals. (p.68)
u Caution
• There are restrictions on some drive modes when used in
combination with some other functions. (p.108)
Single Frame Shooting Single Frame Shooting
Cancel Cancel OK OK