Ricoh PENTAX K-1 II Operating Manual page 53

Setting the Exposure Control Method
In [Program Line] of the A1 menu, you can specify how the
exposure is controlled.
A Auto Determines the appropriate settings.
Sets to the basic program automatic
B Standard
exposure (all-around mode).
Hi-speed
C Prioritizes high shutter speeds.
Priority
DOF
Priority Closes the aperture for a deep depth of field.
D
(Deep)
DOF
Opens the aperture for a shallow depth of
Priority
E
field.
(Shallow)
Sets the sharpest aperture of the attached
MTF
F lens when a D FA, DA, DA L, FA, or FA J lens
Priority
is used.
t Memo
• The Program Line setting is enabled in the following
situations.
• In G or H mode
• When GLINE is set for the M operation of K or L in [E-
Dial Programming] of [Button Customization] in the A5 menu
A1 Bulb Exposure
1
Set the mode dial to M.
2
Use R to set the
aperture value.
3
To enable the timed exposure, press M, and
then use Q to set the exposure time.
You can set the exposure time within the range from 10" to
20'00".
4
Press 0.
While 0 is pressed, exposure continues.
If the timed exposure is enabled in Step 3, the exposure
ends when the set exposure time elapses after 0 is
fully pressed.
t Memo
• You can start and end exposure also by pressing 0. Set
in [6 Bulb (B) Mode Options] of the E1 menu.
• When performing the bulb exposure, use a tripod and mount
the camera on it securely. The use of the optional cable
release is recommended.
u Caution
• The drive mode cannot be set to [Continuous Shooting],
[Bracketing], or [Interval Shooting].
8.0 8.0
F F
102400 102400
3
99999 99999
99999 99999
51