Connecting The Camera To An Av Device - Ricoh PENTAX K-1 II Operating Manual

Connecting the Camera to an AV Device

Connect to an AV device, such as a TV, equipped with an
®
HDMI terminal to display Live View images while shooting or
to play back images in playback mode.
Make sure to have a commercially available HDMI
®
equipped with an HDMI terminal (type D).
1
Turn the AV device and camera off.
2
Open the terminal cover of the camera, and
connect the cable to the HDMI
3
Connect the other end of the cable to the input
terminal on the AV device.
4
Turn the AV device and camera on.
The camera turns on in HDMI
information is displayed on the screen of the connected AV
device.
u Caution
• While the camera is connected to an AV device, nothing is
displayed on the camera monitor. Also, you cannot adjust the
sound volume on the camera. Adjust the volume on the AV
device.
®
cable
®
terminal.
®
mode, and the camera
t Memo
• Check the operating manual of the AV device and select a
suitable input terminal for connecting the camera.
• By default, the maximum resolution supported by both the AV
device and camera is automatically selected. If it fails to play
back images properly, change the setting in [HDMI Out] of the
D2 menu.
• If you intend to use the camera continuously for a long period,
the use of the optional AC adapter kit is recommended. (p.40)
4
87