Attaching The Strap; Attaching A Lens; Getting Started - Ricoh PENTAX K-1 II Operating Manual

Attaching the Strap

1
Pass the end of the strap
through the triangular ring.
2
Secure the end of the strap
on the inside of the clasp.
When the Battery Grip is Used
When the optional Battery Grip
D-BG6 is used, you can attach
one end of the strap to the battery
grip.

Attaching a Lens

1
Make sure that the camera is turned off.
2
Remove the body mount
cap (1) and lens mount
cover (2).
Turn the body mount cap
counterclockwise while pressing
the lens unlock button (3).
After removing the cover, be sure
to put the lens down with the lens
mount side facing upward.
3
Align the lens mount
indexes (red dots: 4) on
the camera and the lens,
and secure by turning the
lens clockwise until it
clicks.
To remove the lens
Attach the lens cap, and then turn
the lens counterclockwise while
pressing the lens unlock button.
2
1
3
2
4
37