Remote Control - Ricoh Pentax K-1 Operating Manual

Remote Control

1
Select Q on the Drive Mode
screen and press B.
3
2
Use CD to select Q, R, or S.
Remote Control
Q
Remote Control (shutter release after about
R
3 seconds)
Remote Control + Continuous Shooting
S
Proceed to Step 6 when Q or R is selected.
3
Press G.
4
Set [Shooting Speed].
5
Press E.
The screen of Step 1 reappears.
6
Press E.
The camera returns to standby mode.
7
Press 0 halfway.
8
Point the remote control unit towards the remote
control receiver on the front of the camera, and
press the shutter release button on the remote
control unit.
58
t Memo
• The maximum operating distance of the remote control unit
• To adjust focus with remote control, set in [10 AF with Remote
Remote Control Remote Control
• When using the Remote Control Waterproof O-RC1,
Cancel Cancel OK OK
Remote Continuous Shooting Remote Continuous Shooting
Shooting Speed Shooting Speed
Cancel Cancel OK OK
is approximately 4 m from the front of the camera.
Control] of the E2 menu.
the autofocus system can be operated with the q button
on the remote control unit. The r button cannot be used.