Ev Compensation; Using The Electronic Shutter - Ricoh PENTAX K-1 II Operating Manual

EV Compensation

The compensation value can be set between -5 and +5 EV (-2
and +2 EV in C mode).
1
Press J, and then turn
R.
e and the compensation value
3
are displayed on the status
screen, LCD panel, Live View
screen, and in the viewfinder
during adjustment.
Available operations
Starts/ends adjusting the compensation
J
value.
Resets the adjustment value to the default
M
setting.
t Memo
• The compensation value can also be adjusted by the Smart
Function. (p.22)
52

Using the Electronic Shutter

A mechanical shutter has front and rear shutter curtains, which
make noise and vibrate the camera when opening and closing
to produce the exposure.
Use of an electronic shutter can reduce noise and vibrations
ISO during shooting with Live View.
Set in [LV Electronic Shutter] of the
Wi-Fi
A2 menu.
u Caution
• [LV Electronic Shutter] cannot be selected in the following
situations.
• In M mode
• When the drive mode is set to [Continuous Shooting],
[Bracketing], or [Interval Shooting]
• When HDR Capture is set
• When [Pixel Shift Resolution] is set to [Image Stabilization
On]
• The following functions are not available when [LV Electronic
Shutter] is selected.
• Flash discharge
• Shake Reduction
• Distortion can be produced in captured images when
shooting moving objects. Also, the flickering of a fluorescent
light and other factors may cause the distortion of captured
images.
• When [Pixel Shift Resolution] in the A3 menu is set to
[Motion Correction On] or [Motion Correction Off], [LV
Electronic Shutter] is fixed to [On].
A2
2
LV Electronic Shutter LV Electronic Shutter
Memory Card Options Memory Card Options
Crop Crop
Image Capture Settings Image Capture Settings
D-Range Settings D-Range Settings
Noise Reduction Noise Reduction
Cancel Cancel OK OK