Operating Controls - Ricoh PENTAX K-1 II Operating Manual

Operating Controls

1
2
3
4
5
6
d
e
f
g
1 Illumination button (8)
Provides lighting for the LCD panel, the backside controls,
the lens mount, and the card slot/connector. You can set
whether to turn on the light or not for each part. (p.100)
2 ISO button (N)
Press to change the ISO sensitivity. (p.55)
3 Shutter release button (0)
Press to capture images. (p.45)
In playback mode, press halfway to switch to capture mode.
4 Main switch
7
Turns the power on or off, or activates the preview function.
(p.41, p.61)
8
5 Front e-dial (Q)
9
Changes the values for camera settings such as exposure.
(p.50)
0
You can change the menu category when a menu screen is
displayed. (p.24)
a
In playback mode, use this to select a different image.
b
6 EV Compensation button (J)
c
Press to change the exposure compensation value. (p.52)
7 Mode dial lock button
Press to allow the mode dial to be turned. (p.44)
h
8 Mode dial
Changes the capture mode. (p.49)
i
9 Mode dial lock release lever
j
Use this lever to release the mode dial lock to operate the
mode dial without pressing the mode dial lock button. (p.46)
k
0 Lock button (7)
l
Temporarily disables dial and button operations to prevent
m
misoperation. (p.46)
n
a RAW/Fx1 button (X)
o
You can assign a function to this button. (p.97)
p
b AF Mode button (b)
q
Press to change the autofocus mode or the focusing area.
r (p.58)
s
c Focus mode switch
Changes the focus mode. (p.57)
d AE Metering/Delete button (2/L)
Press to change the metering method. (p.56)
In playback mode, press to delete images. (p.47)
e Live View button (K)
Displays the Live View image. (p.45)
1
11