Ricoh PENTAX K-1 II Operating Manual page 79

Shooting High-Definition Images
Pixel Shift Resolution is the feature that enables outputting a
high-definition image of stationary objects by merging four
images.
Set in [Pixel Shift Resolution] of the
A3 menu.
Corrects mosaic-pattern noise when a
Motion
moving object is detected, and captures an
Correction On
image using the electronic shutter.
Motion Captures the entire range of image using
Correction Off the electronic shutter.
Captures an image while performing image
Image stabilization using the mechanical shutter
Stabilization On when the camera cannot be set on a fixed
support such as a tripod.
Off Does not use Pixel Shift Resolution.
When shooting is performed, captured four images are
displayed in turn, and then they are merged into a single image.
u Caution
• This function cannot be used in the following situations.
• In M or N mode
• In C mode
• This function cannot be used in combination with some other
functions. (p.108)
• While this function is used, [AA Filter Simulator] of the A4
menu is fixed to [Off].
• [LV Electronic Shutter] of the A2 menu and [Shake
A3
99999 99999 99999 99999
Clarity Clarity
Skin Tone Skin Tone
Digital Filter Digital Filter
HDR Capture HDR Capture
Pixel Shift Resolution Pixel Shift Resolution
ASTROTRACER ASTROTRACER
Cancel Cancel OK OK
• When [Motion Correction On] or [Motion Correction Off] is
• When [Image Stabilization On] is selected, perform shooting
t Memo
• When [Pixel Shift Resolution] is assigned to X or Y, you
• If a moving object exists in the frame, mosaic-pattern noise
• The use of Pixel Shift Resolution in combination with Self-
• Using [Motion Correction On] or [Motion Correction Off] with
Reduction] of the A4 menu are fixed to [On] or [Off]
depending on the [Pixel Shift Resolution] setting as shown
below. When the [Pixel Shift Resolution] setting is changed to
[Off], [LV Electronic Shutter] and [Shake Reduction] return to
original settings.
[Pixel Shift Resolution] LV Electronic
setting
Motion Correction On
Motion Correction Off
Image Stabilization On
selected, mount the camera on a support such as a tripod
securely before shooting.
without changing the composition until four images are
captured, not using a support such as a tripod.
can change the [Pixel Shift Resolution] setting by a simple
button operation. (p.97)
may appear in the image. In such case, select [Motion
Correction On].
timer, Remote Control, or Mirror Lock-up Shooting is
recommended.
the camera set on a fixed support such as a tripod provides
higher-definition images than using [Image Stabilization On].
Shake
Shutter Reduction
On Off
Off On
3
77