Omron NT30C-ST141-E Operation Manual page 147

Screen Displays
S System Keypad (Numeral Setting) Attribute
Select whether the numeric keys are automatically displayed or the numeric
keys are created at arbitrary positions on the numeral setting screen. The fol-
lowing two numeral setting attributes are used.
System (ON):
The numeric keys and control keys registered to the system are auto-
matically displayed.
User (OFF):
The numeric keys and control keys can be created at any arbitrary
positions.
With DOS versions of the NT-series Support Tool, "numeral setting" is dis-
played.
S Back Col (NT30C only)
Screens for which this attribute has been set are automatically displayed with
the set background color extending over the entire screen.
S Backlight Attributes
Select whether the backlight is lit or flashes when the screen is displayed.
When using an NT30, these attributes can be used in conjunction with the
backlight color attribute. There are two types of backlight attribute in the screen
attributes
Lit: Backlight is lit when the screen is displayed.
Flashing: Backlight flashes when the screen is displayed.
S Backlight Color Attribute (NT30 Only)
Set whether the screen is displayed using the white backlight or the red back-
light. This attribute can be used in conjunction with the backlight attributes.
S Load Local 1 (Keyboard) Attribute (Windows Version Only)
Specify whether or not a window is displayed simultaneously with the display of
the screen (initial window), and specify the screen number of the window.
This screen attribute is not available with the DOS version of the NT-series
Support Tool. (Set in Show Window/Keyboard under Input Settings.)
Section 4-3
135