Omron NT30C-ST141-E Operation Manual page 204

Outline of Host Link and NT Link Operations
Sym-
bol
DM DM Area
CH IR Area
TIM Timer Area
CNT Counter Area
HR HR Area
AR AR Area
LR LR Area
Correct use
15 14 13 12 11 10
192
The PT Status Control Area (PC to PT) can be allocated words in the following
PC areas.
Alloca-
C Series PC
tion
f
f
×
×
f
f
f
The Auxiliary Area of CV series PC is used exclusively for special applications in
the system, and cannot be used for other application.
The range of each memory area differs according to the PC type. Refer to
Appendix J PC Memory Maps (page 293).
Make the allocations so that there is no duplication between the PT Status Con-
trol Area and the PT Status Notify Area.
S Screen Switch Settings (refer to page 195)
Specify the screen # to switch the screen displayed on the NT30/30C.
S Copy Memory Table Entry Settings (refer to page 212)
Specify the memory table entry number to copy the contents of a memory table
entry internally in the NT30/30C.
Set the copy type to match the type of memory table entry to be copied:
0: Character string memory table entry
1: Numeral table entry
S PT Status Control Bits (refer to page 240)
Set the bits ON or OFF according to the following table to control the screen
display and buzzer.
9
0
Alloca-
CVM1/CV Series PC
tion
DM Area
f
CIO Area
f
Timer
×
Counter Area
×
--
Auxiliary Area
×
--
8 7 6 5 Bit
Controlled Item
Screen display
Continuous buzzer
Intermittent buzzer
(short)
Display history
initialization
Backlight color
Intermittent buzzer
(long)
Backlight mode
Screen printing
Window opening
Numeral/character
string input
Section
: Possible
f
× : Impossible
CS1 Series PC
DM Area
CIO Area
Timer
Counter Area
-- HR Area
Auxiliary Area
-- --
1 (ON)
Performed Not performed
Sounded Not sounded
Sounded Not sounded
Performed Not performed
Red
Sounded Not sounded
Lit Flashing
Performed Not performed
Disabled
Disabled
5-1
Alloca-
tion
f
f
×
×
×
×
--
0 (OFF)
White
Enabled
Enabled